Preparing the rope…
Drag to rotate · Pinch to zoom
- 1
Start with a long end
Leave enough working rope for an adjustable loop and three turns.
- 2
Go through the attachment
Pass through the ring and turn back beside the standing part.
- 3
Leave an adjustable loop
Bring the end down on the left, leaving room between the ring and the hitch.
- 4
Make the first inside turn
Wrap the end around the standing part, inside the large loop.
- 5
Add a parallel turn
Wrap a second time toward the ring. Lay this turn beside the first without crossing it.
- 6
Cross outside the loop
Bring the end diagonally down over the two turns to the other side of the knot.
- 7
Finish with a half hitch
Go around once more in the same direction, then tuck below the diagonal and bring the tail out.
- 8
Check the adjustable hitch
Two parallel turns lie inside the loop and a half hitch lies outside. Slide it only after releasing tension.