Preparing the rope…
Drag to rotate · Pinch to zoom
- 1
Leave a working end
Bring the end to the bar, with the standing part on the intended pull side.
- 2
Begin the grip turns
Wind away from the pull side.
- 3
Complete five turns
Keep the turns parallel and leave the standing part free.
- 4
Return outside the band
Leave an open loop below the turns and pass behind the standing part.
- 5
Go over the bar
Thread the end around the bar on the pull side.
- 6
Return around the standing part
Pass behind the standing part again and go over the bar once more.
- 7
Bring the tail down
Bring the end down alongside the standing part through the open lower loop.
- 8
Dress the hitch
Seat the turns together. This version is threaded with the end, so no free end of the bar is needed.